The brand new Pro Xpc Auto electrostatic spray gun has been designed with flexibility in mind, allowing the operator to really take charge of the spraying process. The system which can be controlled by both a PLC and a switchboard features a compact and lightweight design, perfect for robots and fixtures with payload limits. In addition to providing maintenance reminders, it has 250 pre-sets allowing the operator to choose from a wide range of part sizes and shapes.
Replacing the Premier™ Air Motor, the XL10000™ is designed for Graco sealant and adhesive supply systems. Intended for use in high production facilities, the durable XL10000™ has reduced downtime compared to its predecessor due to exposed air poppets and air valves which provide easy access when carrying out maintenance work or during servicing. It also features a powerful 33cm diameter motor, lower pulsations and reduced noise levels.
Graco have extended their transfer pump range with the Husky 1050e - an electric operated 1" double diaphragm pump which delivers all the advantages of an air operated pump but is 5 times more energy efficient and is quieter due to the electric motor. The Husky 1050e which has a maximum volume of 159/min has been designed so that there is no need to install pressure sensors or a surge processor.
Graco have today unveiled the Xtreme XL Sprayer, designed for contractors who require a high output machine which delivers superior performance. It incorporates a new 10,000 cc XL Air Motor which enables it to run up to 6 spray guns at any time getting the job done faster, with practically no effect on pulsation and pattern.
Graco have launched the ChemSafe transfer pump to their AODD range, designed specifically for the more challenging corrosive and abrasive fluids than the 'standard' husky pumps. The product line which is available in 1/4" though to 1.5" and is compatible with 99% of transferred chemicals features a corrosion resistant exterior with no exposed metal, an anti-stalling air-valve, a removable air motor for easy service and a low icing muffler.
GEMS is Binks' easy to operate 2K mixing solution which recognises the value of information in a spray process. The sophisticated unit incorporates a large user friendly interface with extensive data capabilities – information about material and solvent usage can lead to less wastage, VOC reduction, accurate production costings and labour costs.
Ransburg have unveiled the RansFlex, a lightweight, compact handgun that utilises a compressed air driven turbine and a high voltage cascade which work together to generate an electrostatic charge enabling it to work without an external electrical power supply and cable.
The gun, available in both 65 kV and 45 kV versions has been cleverly designed to be lightweight, yet robust, incorporating stylised user friendly controls and an on-board pneumatic power generation and builds-on DeVilbiss atomisation technology.
Graco's new Pro Xp Auto electrostatic automatic spray guns are an exciting new extension to their Pro Xp range, available in air spray and air assist gun models. The system has been designed with flexibility in mind with a wide variety of manifold styles and gun configurations, delivering excellent finish quality and performance whilst reducing material usage.
The brand new Graco Husky 1050HP is a 2:1 ratio air-operated triple diaphragm pump (AOTD) for pumping fluid at a maximum pressure of 17.2 bar. It features an addtional third diaphragm to allow the pump to operate at full flow, increasing the maximum capacity to 166l/min.
The pump also benefits from a low-high pressure mode valve which allows the end-user to choose to either operate at low pressure (1:1) or high pressure (2:1). This is advantageous when high pressure isn't not required - the option to switch to low pressure reduces air consumption by up to 50%.
This feature, the new unique design combined and the quality and reliability promised with all Graco products make the 1050HP one of best high pressure diaphragm pumps available.
Graco's new fixed ratio mechanical proportioner – the M2K – is an easy to use, entry level system, designed to eliminate hand mixing. Ideal for lower volume two component epoxy, polyurethane and polyester materials, the mix material accuracy will improve finish quality and reduce material waste, flush and clean up time, compared to hand mixing.